NEC Express 5800 User Manual page 66

3-26 Windows Setup
35. After installation of Windows HotFix is complete, installation is continued.
Do not perform any operations. When the NEC Express5800/ft series software is installed, the
NEC Express5800/ft series will be restarted automatically.
Express5800/ft series clear installation
** Please do not perform any operations.
** The system will restart automatically. **
*** Setting [ft series environment (Preparation)] ***
*** Setting [ft series environment (NECHWID)] ***
*** Setting [Timeout for non-communication time] ***
*** Installing [Stratus Big Board Driver] ***
*** Installing [IPMI] ***
*** Installing [PROSET II] ***
*** Installing [SRAPS] ***
*** Installing [mof file] ***
*** Installing [Stratus Debug Print Driver] ***
*** Installing [NEC ESMPRO Agent] ***
*** Installing [Express Report Service] ***
*** Installing [BMCTOOL] ***
*** Setting [Configuration of ft dump] ***
*** Setting [Hardware Accelerator] ***
*** Installing [Hotfix] ***
*** Installing [Strage Manager] ***
*** Setting [NECDUMP] ***
*** Setting [Memory copy (Brown copy)] ***
*** Setting [WindowsOS] ***
*** Setting [Disk] ***
*** Setting [ft version information] ***
The system will automatically restart in approximately 10 seconds.
36. After the system is restarted, the following screen will appear and the installation is continued. Do
not perform any operations. NEC Express5800/ft series is configured and the system is restarted
automatically.
Express5800/ft series clear installation
** Please do not perform any operations.
** The system will restart automatically. **
Scanning for PCI Module (Group 2) . . . . . . . . . . . . . . .
PCI Module (Group 2) recognized.
*** Setting [Configuration of PCI auto bringup] ***
*** Setting [Server wizard on] ***
The system will automatically restart in approximately 10 seconds.
**
**