NEC Express 5800 User Manual page 108

5-10 Troubleshooting
<For option board >
- Status AA-U51500 10/100 Enet Adapter (100BASE-TX)
- Status AA-U57000 Fiber Gigabit Adapter (1000 BASE-SX)
- NEC 8490 XT Copper Gigabit Adapter (1000 BASE-T)
You will then see the dialogue box on the right
of this paragraph. This is
because one of two
teamed adapters
constituting dual
configuration is
removed.
Click [Yes] button, to remove the adapter from Team.
Remove the other adapter in the same way.
<For on-board >
- Status emb-82559 10/100 Enet Adapter
- Status emb-82544GC Copper Gigabit Adapter
<For option board >
- Status AA-U51500 10/100 Enet Adapter (100BASE-TX)
- Status AA-U57000 Fiber Gigabit Adapter (1000 BASE-SX)
- NEC 8490 XT Copper Gigabit Adapter (1000 BASE-T)
4) Right click [Team
#1:Adaptive Fault
Tolerance Mode] and
select [Remove].
At that time, the dialog box shown on the right is displayed. This is a message for
confirmation, so click [Yes] button.
Remove all teams displayed on the
[Intel PRO Set II] dialog box in the
same manner.