Programming Auto Dial Numbers - Oki OKIFAX 1050 User Manual

Programming Auto Dial Numbers

Programming Auto Dial Numbers
For each auto dial number, you can enter a fax number up to 32 digits long and a Location ID (name) up
to 15 digits long.
There are 40 auto dial locations on your fax machine.Warning: Auto dial location#40 is reserved for the
relay broadcast initiate function. If you are planning to use this function, do not program an auto dial
number into this location. For more information, see the section on Relay Broadcasting in the Advanced
Operations chapter.
1 Press the Select Function key.
2 Press the 8/Location Program One Touch key. The Display will show LOCATION
PROGRAMMING.
3 Press the Auto Dial key.
4 Using the numeric keypad, enter a 2-digit number for the Auto Dial number you want to program.
Forty Auto Dial numbers are available (0140).
5 The display will briefly show NO=<FAX NO.>, ID=<LOCATION ID> (or a previously-programmed
fax number and location).
6 After the display clears, enter the fax number. Refer to the instructions below.
7 Press the Start key.
8 Enter the Location ID. This is a descriptive title up to 15 characters long. Refer to the instructions
below.
9 Press the Start key to finish programming the One Touch key. The display will show LOCATION
PROGRAMMING.
10 To continue programming Auto Dial numbers, go back to Step 4. If you are finished
programming, press the Select Function key.
OF1050 Users Guide(96-01-30)