Auto Dial Numbers Programming - Oki OKIFAX 5400 User Manual

To use a chain dial number, select the One Touch key or Auto Dial number
programmed with the first part of the chain dial number. The display will
show PRESS OT/AD/SRCH KEY. Then select the One Touch key or Auto
Dial number programmed with the second part of the chain dial number.
If the second part of the chain dial number was not programmed, enter it
manually on the numeric keypad. Press the Start key to begin sending the
fax.

Auto dial numbers programming

Your fax machine has 99 Auto Dial numbers available for quick, two-digit
selection and dialling. For each Auto Dial number, you can enter a fax
number up to 32 digits long and a Location ID (name) up to 15 characters
long.
Note:
To find Auto Dial numbers which are not yet programmed, you
may repeatedly press the Search key in Step 2 below. If some One
Touch keys are not programmed, searching automatically looks
for the first unassigned One Touch key.
1. Press the Select Function key, then press the 8/Location Prog. One
Touch key. The display shows LOCATION PROGRAMMING.
2. Press the Auto Dial key.
3. Using the numeric keypad, enter a 2-digit number for the Auto Dial
number (01 to 99) you want to program.
4. The display will briefly show NO=<FAX NO.>, ID=<LOCATION
ID> or a previously-programmed fax number and location.
5. Enter the fax number. Refer to the instructions below.
To Do This
Enter numbers
Enter spaces
Enter hyphens (i.e. to wait for dial
tone)
Enter pauses (i.e., to wait for outside
lines)
Add a switch from pulse to tone
dialling for part of the call
Move the cursor to make corrections YES and NO keys.
6. Press the Start key.
42
Numeric keypad
Space One Touch key
Hyphen key
Pause key
*/Tone key
Use
User's Guide