Control Panel - Oki OKIFAX 1050 User Manual

Control Panel

Control Panel
Control Panel Keys and Indicators
1 LCD Display Panel: Refer to this display for instructions and information while your fax machine is
performing operations or while you are programming.
2 Copy Key: After loading a document, press this key to make a copy. When no documents are
loaded, press this key to obtain a Message Confirmation Report about your last transmission.
3 Hyphen Key: When programming One Touch keys and Auto Dial telephone numbers, use this key
to tell your fax machine to wait for the outside or international line to become available before it
proceeds with dialing the rest of the telephone number. When programming the TSI/CSI or call
back numbers into your fax machine, use this key to enter a + symbol.
4 Search Key: The One Touch keys and Auto Dial numbers can be programmed to have a name or
location ID associated with their telephone numbers. Using this key by itself or in combination
with the numeric keypad, you can search for these numbers alphabetically.
5 Auto Rec Key: Use this key to switch your fax machines answering mode. The answering mode
controls how your fax
machine answers incoming calls and receives faxes. Your fax machines display will always
indicate your current selection. See Setting the Answering Mode in the Installation chapter for
more information about the answering modes available in your fax machine.
6 Select Function Key: Use this key to activate your fax machines advanced transmission and
reception functions, to obtain reports and for programming. To select a function, press the Select
Function key, then press the One Touch key labeled with the function you want to use.
While programming or selecting other functions, pressing the Select Function key a second time
takes you directly back to your fax machines standby mode.
7 Auto Dial Key: Auto Dial numbers are abbreviated numbers for rapid dialing. Rather than dialing
the entire telephone number, you can enter a 2-digit Auto Dial number instead. You can also use
the Location IDs (names) associated with Auto Dial numbers to search for these locations by
name using the Search key.
OF1050 Users Guide(96-01-30)