Sending A Fax To Multiple Locations (Broadcasting) - Oki OKIFAX 1050 User Manual

Sending a Fax to Multiple Locations (Broadcasting)

Sending a Fax to Multiple Locations (Broadcasting)
Your fax machines broadcasting feature allows you to send a document to many different locations as a
series of sequential transmissions. This feature is useful if you often send the same information to many
different locations.
Tip:
Programming groups will save you time if you constantly send the same information to the same
locations. For more
1 Load your documents. Select resolution and contrast if necessary.
2 Press the Select Function key.
3 Press the 2/Broadcast Memory TX One Touch key. The display will show
BROADCAST/MEMORY TX, SELECT LOCATIONS(S).
4 Select a location. Refer to the instructions below.
5 Press the Yes < key to confirm your selection.
6 Repeat Steps 4 and 5 as often as necessary to continue selecting locations. You can enter up to
50 locations (one touch and auto dial) and up to five manual locations.
7 When you are finished selecting locations, press the No > key at the SELECT LOCATION(S)
message.
8 If you have selected multiple locations, your fax machine will ask if you want to confirm your
selections with a printed report before proceeding. Press the Yes < key. After the report is
printed, the display will show SCANNING START? If you want to make corrections, press the No
> key and go back to Step 4. To remove a location, select the location in the same way, but press
the No > key to delete it from your transmission.
9 When all of your selections are correct, press the Start key. Your fax machine will scan the
documents into memory and begin transmitting the message.
OF1050 Users Guide(96-01-30)
information on programming groups, see the chapter Dialing Directories.