Receiving Faxes In Memory - Oki OKIFAX 1050 User Manual

Receiving Faxes in Memory

Receiving Faxes in Memory
Your fax machine will automatically receive messages into memory (and not immediately print them) in a
few different situations.
No Paper Reception
When your fax machine has run out of paper, a NO PAPER, REPLACE PAPER message will
appear on the display. Even when your fax machine runs out of paper, it will continue to receive
faxes in memory.
1 Your fax machine will automatically print out any messages received in memory when the paper is
replaced.
No Toner Reception
When your fax machine is running low on toner, it will display a TONER LOW, REPLACE TONER
message, and will receive faxes into memory (rather than risk printing an unreadable message).
If your fax machine has received a message in memory because toner is low, MSG. IN
MEMORY will appear on the display.
To print out a message stored in memory when toner is running low, use the following instructions.
1 Press the Select Function key.
2 Press the 10/Message Print From Memory One Touch key. The display will show 1:SUBST.
MESSAGE PRINT.
3 Press the Yes < key. The stored message will begin printing.
Tip:
Even if you see a TONER LOW message on your fax machine, you may be able to use the
10/Message Print From Memory One Touch key to continue printing faxes, but the print quality
cannot be guaranteed. Replace your toner cartridge as soon as possible.
Cancelling Messages Stored in Memory
It is also possible to erase messages received in memory without printing them.
1 After you have followed the instructions to print out messages stored in memory, the display will
show MSG. IN MEMORY, PRINTING.
2 To erase the message instead of printing it, press the Stop key. The display will show CANCEL?
3 Press the Yes < key to erase the message from your fax machines memory.
OF1050 Users Guide(96-01-30)