Chapter 4 Programming One Touch Keys - Oki OKIFAX 1050 User Manual

Chapter 4
Programming One Touch Keys
Programming One Touch Keys
You can store up to two fax numbers with 32 digits for each One Touch key, a main number and an
alternate number which will be used if the main number is busy. You can also enter a 15-character
Location ID (name) for each One Touch key.
Ten One Touch keys are available on your fax machine.
1 Press the Select Function key.
2 Press the 8/Location Program One Touch key. The display will show LOCATION
PROGRAMMING.
3 Press a One Touch key to program.
4 The display will briefly show NO=<FAX NO.>, ID=<LOCATION ID> (or a previously-programmed
fax number and Location ID).
5 After the display clears, enter the main fax number. Refer to the instructions below.
6 Press the Start key.
7 Enter the Location ID. This is a descriptive title up to 15 characters long. Refer to the instructions
below.
8 Press the Start key. The display will show NO=<OR LOCATION>.
9 Enter the alternate fax number. Refer to the instructions following Step 5.
10 Press the Start key to finish programming the One Touch key. The Display will show LOCATION
PROGRAMMING.
11 To continue programming One Touch keys, go back to Step 3. If you are finished programming,
OF1050 Users Guide(96-01-30)