One Touch Parameters - Oki OKIFAX 1050 User Manual

One Touch Parameters

One Touch Parameters
If you are experiencing problems communicating with a remote location in a very noisy telephone area,
set up a One Touch key for that location and try turning Echo Protection on for that One Touch key.
1 Press the Select Function key.
2 Press the 9/User Program One Touch key. The display will show 1:FUNC. PROGRAMMING.
3 Press the Yes < key. The display will show FUNCTION NO. [ ].
4 Using the numeric keypad, enter 17. The display will show 17:ONE TOUCH PARAM.
5 Press the One Touch key for the location setting you want to change. The display will show
ECHO PROTECTION, [OFF].
6 Press the No > key to switch Echo Protection on.
7 Press the Yes < key to confirm your selection. The display will show FUNCTION NO. [ ].
8 Press the Select Function key to finish.
Tip:
Switch Echo Protection back off if you later change the location the One Touch key is used for.
Chain Dialing
Each fax number that you enter or program into your fax machine can be up to 32 digits long. If you
need to dial a number which is longer than 32 digits, it is possible to dial a number using any
combination of One Touch keys, Auto Dial numbers or the numeric keypad.
To do this, enter the first part of the number in a One Touch key or Auto Dial number, and enter the
remaining digits in another One Touch key, Auto Dial number or on the numeric keypad.
When dialing, wait for the first part of the number to complete dialing, then select or begin dialing
the second part of the number.
Chain dialing will work only if your machine is set for feeder transmission. It will not work with a
memory or broadcast transmission.
OF1050 Users Guide(96-01-30)