Charge Print; Configuring Charge Print Settings - Fuji Xerox DocuPrint C5005 d User Manual

3.9

Charge Print

Charge Print is available if the printer has HDD Extension Kit (optional) or RAM disk is
configured validly.
Important
• In case the hard disk fails, we recommend you to back up the hard disk data on your computer.
• All documents stored may be deleted if the printer power is turned off and on, while using RAM disk.
Refer to
• How to enable RAM disk: "7.8 Enabling a RAM Disk" (P. 341)
Charge Print
Charge Print is a function to allow the printer to prevent invalid print job based on smart card
authentication of the user, if IC Card Reader (optional or purchase separately) is connected
to the printer.
If [Admin Menu] > [System Settings] > [Authentication] > [Charge Print] > [Receive Control]
of the control panel is set to [Save inChargePrint], print job data from a computer will be
temporarily saved in the printer by each Billing ID. Print job data without a Billing ID will be
saved as [No User ID]. Print job data saved is available for printing by the user operation
from a printer.
Note
• Print job without a user ID is also available for printing by authentication, since print job without a user ID
which cannot be saved in Private Charge Print (Print job using ContentsBridge and CentreWare Internet
Services, Mail Print, etc.) can be saved.
• The IC Card Reader may not be supplied with the printer in some regions. Contact your dealers for
details.
• The Authentication feature includes login to local accounts, which uses user IDs and other login
information registered on the printer, and login to remote accounts with an affiliated external
authentication server. Contact your dealers for information about using the Authentication feature.
• If IC Card Reader is connected, print job data for Secure Print and Sample Set already stored in the
printer may not be available to use. In this case, print or delete print job data before connecting IC Card
Reader.

Configuring Charge Print Settings

Configuring Printer Settings
Charge Print is displayed if any of the following is set in [Admin Menu] > [System Settings]
> [Authentication] > [Charge Print] of the control panel.
• When [Receive Control] is set to [Save inChargePrint].
• When [Receive Control] is set to [ReferPrintAuditron] while [Save inChargePrint] is set in
[Process Job Login] > [Job Login Failure].
• When [Receive Control] is set to [ReferPrintAuditron] while [Save inChargePrint] is set in
[Process Job Login] > [Without User ID].
Refer to
• " Charge Print" (P. 183)
Configuring Print Driver Settings
Set Billing ID on the print driver properties dialog box. In addition to Billing ID, passcode
must be set to prevent other users from operating your documents.
96
3 Printing