Fuji Xerox DocuPrint C5005 d User Manual page 394

Supported protocol
Power
Operating noise
(main unit only)
Power consumption
Dimensions (main unit only)
Weight
Usage Environment
394
A Appendix
Items
TCP/IP (LPD, Port9100, HTTP, DHCP, IPP, SNMP), SMB, NetWare,
Web Services on Devices (WSD), Bonjour (mDNS), EtherTalk
AC 110 - 120 V ± 10%; 15 A; both 50/60 Hz
AC 220 - 240 V ± 10%; 7 A; both 50/60 Hz
Important
• Power outlets that provide the above power level is
recommended. Maximum machine measured current: 12.5A
During operation : 7.25 B; 54.5 dB (A) or less
During stand-by : 4.3 B; 25.5 dB (A) or less
Important
• Measurements based on ISO7779
Unit B: acoustic power level (LwAd)
Unit dB (A): radiated sound pressure (bystander position)
AC 110-120V
Maximum: 1650W, During the Sleep mode: 1.5W or less
Average: During stand-by: 85W
AC220-240V
Maximum: 2400W, During the Sleep mode: 2W or less
Average: During stand-by: 75W
Important
• Low Power Mode: 46W average (AC110-120V), 48W average
(AC220-240V)
(The printer does not use electricity when the power is switched
off even with the power cord is plugged in.)
640 (W) x 699 (D) x 600 (H) mm
Important
• When standard tray (Tray 1) is installed (the main unit when
Bypass Tray is folded)
Main Unit: 81.2 kg (main unit only, including consumables)
During Use: Temperature: 10 - 32 °C; Humidity: 15 - 85% (to reduce
malfunctions from condensation)
Non-Use: Temperature: -10 - 40 °C; Humidity: 5 - 85% (to reduce
malfunctions from condensation)
Important
• Until the conditions (temperature and humidity) inside the printer
become acclimated to the installation environment, certain
qualities of the paper can cause poor printing.
Description
During continuous printing: 880W
During continuous printing: 890W