Fuji Xerox DocuPrint C5005 d User Manual page 307

3. Hold the tabs on both sides of a new staple
cartridge, and insert it into the original
position until it clicks.
4. Repeat steps 2 and 3 to replace the other
staple cartridge.
5. Close the booklet maker side cover.
Note
• If the cover is not completely closed, a message will
appear and the machine remain paused.
Replacement Procedure (for Finisher-C1 with Booklet Maker)
When the message Staple Cartridge R1 is displayed on the display, follow the instruction
below to replace the staple cartridge with a new one.
1. Make sure that the machine is not
operating, and open the front door.
2. Grasp the handle R1 of the staple cartridge
holder, and pull out the holder to the right,
towards you.
3. Take the staple cartridge out of the finisher.
Note
• The staple cartridge is firmly inserted. A slight force is
required to pull the cartridge out of the finisher.
7.1 Replacing Consumables
307