Fuji Xerox DocuPrint C5005 d User Manual page 159

Setting
Port Number Sets the port number from 1 to 65535. (See *2 on P. 214.)
• [80] (default)
Note
• Set only unique port numbers. Note, however, that InternetServices/IPP/
[SOAP]
Network/Port
SOAP
Setting
Port Status Sets whether to enable or disable the SOAP port at printer start-up.
• [Enabled] (default)
• [Disabled]
Important
• If the printer runs out of memory when the port is enabled, the port is
Port Number Sets the port number from 1 to 65535. (See *2 on P. 214.)
• [80] (default)
Note
• Set only unique port numbers. Note, however, that InternetServices/IPP/
[ThinPrint]
Note
• This item appears only when HDD Extension Kit (optional) is installed.
®
• To use ThinPrint feature, contact our Customers Support Center or your dealer for details.
Network/Port
ThinPrint
SOAP/UPnP/WSD ports and Internet services that use HTTP protocol can
share the same port number.
SOAP
Port Status
SOAP
Port Number
sometimes automatically disabled. If this happens, either disable unused
ports, or change the memory allocation under [Allocate Memory].
SOAP/UPnP/WSD (See *6 on P. 214) ports and Internet services that use
HTTP protocol can share the same port number.
ThinPrint
Port Status
ThinPrint
Port Number
ThinPrint
SSL/TLS
Description
Description
5.2 Common Menus Setting
159