Fuji Xerox DocuPrint C5005 d User Manual page 168

[SNTP Settings]
NTP Synchronize
Connect Interval
NTP IP Address
[HTTP-SSL/TLS]
Note
• Set this when encrypting HTTP communication data using the SSL/TLS protocol. [HTTP-SSL/TLS]
appears only when a certificate is registered on the printer.
• For details on encrypting HTTP communication data and a server certificate required for the printer, refer
to "Configuring HTTP Communication Encryption Settings" (P. 358).
• Communication encryption is not supported on the model available in China.
Enablement
Port Number
168
5 Control Panel Settings
Network/Port
SNTP Settings
Setting
Sets whether or not to synchronize the time of the printer's machine clock with
that of the NTP server.
• [Off] (default)
• [On]
Sets the interval used for connecting to the NTP server. Specify the value from
1 to 500 hours in 1 hour increments. (See *2 on P. 214.)
• [168 Hours] (default)
Sets the IP address of the NTP server.
Enter the IP address in the format: xxx.xxx.xxx.xxx. For IP addresses, xxx can
be any number between 0 and 255. (See *2 on P. 214.)
• [000.000.000.000] (default)
Network/Port
HTTP-SSL/TLS
Setting
Sets whether or not to encrypt HTTP communication data using the SSL/TLS
protocol.
• [Disabled] (default)
Disables SSL/TLS communication.
• [Enabled]
Enables SSL/TLS communication.
Sets the port number from 1 to 65535. (See *2 on P. 214.)
• [443] (default)
Note
• Set only unique port numbers.
SNTP Settings
NTP Synchronize
SNTP Settings
Connect Interval
SNTP Settings
NTP IP Address
Description
HTTP-SSL/TLS
Enablement
HTTP-SSL/TLS
Port Number
Description