Fuji Xerox DocuPrint C5005 d User Manual page 137

The following table describes the overview of the common menus.
Common menu
LanguageEmulation
Print Reports
Meter Reading
Admin Menu
Language
Note
• For information on the basic procedure to set each menu item, refer to "Basic Procedure" (P. 138).
Description
[ESCP]
Sets the ESC/P emulation mode.
[HPGL]
Sets the HP-GL and HP-GL/2 emulation modes.
[PDF]
Configures the settings for printing PDF files directly.
[PCL]
Sets the PCL emulation mode.
[PostScript]
Sets the PostScript-related settings.
[XPS]
Configures the settings for printing XML Paper
Specification (XPS) files directly.
[XDW (DocuWorks)]
Configures the settings for printing DocuWorks files
directly.
Allows you to print a variety of reports/lists.
Displays the number of printed pages on the control
panel.
[Network/Port]
Sets host interfaces and the settings required to enable
their communication.
[System Settings]
Sets the printer's basic functions, such as alert tones and
the Energy Saver feature. It also sets a password for the
control panel to prevent settings from being changed
unintentionally.
[Printer Settings]
Sets the paper trays and the Auto Tray Selection feature.
[Allocate Memory]
Changes the size of memory and form memory of each
interface.
[Image Quality]
Adjusts color density when the color density of the print
quality has shifted.
[Adjust Finisher]
Adjusts the position of the punch holes when the finisher
is installed or the folding position for booklet printing.
[Init/Delete Data]
Initializes the hard disk and settings, and deletes data
(such as forms) stored in the printer.
Switches the control panel display language.
Reference
'ESC/P Emulation Setting Guide'
on the Driver CD Kit CD-ROM.
'HP-GL, HP-GL/2 Emulation
Setting Guide' on the Driver CD
Kit CD-ROM.
" [PDF]" (P. 141)
'PCL Emulation Setting Guide' on
the Driver CD Kit CD-ROM.
"[PostScript]" (P. 143)
"[XPS]" (P. 144)
" [XDW (DocuWorks)]" (P. 145)
"Printing Reports/Lists" (P. 326)
"Checking the Meter Reading by
Output Color (Meter)" (P. 330)
"[Network/Port]" (P. 147)
"[System Settings]" (P. 170)
"[Printer Settings]" (P. 190)
"[Allocate Memory]" (P. 206)
"[Image Quality]" (P. 208)
" [Adjust Finisher]" (P. 211)
" [Init/Delete Data]" (P. 212)
"[Language]" (P. 214)
5.1 Overview of the Common Menus
137