Fuji Xerox DocuPrint C5005 d User Manual page 112

Paper for 2-Sided Printing
The following sizes and types of paper can be used for 2-sided printing.
A3
A5
8.5 x 14"
Letter-Cover
Custom Paper (Width: 128 - 320 mm,
Length: 140 - 483 mm)
*1
: 2-Sided printing can be performed automatically with the paper weighing up to 220gsm.
Note
• If you want to print on both sides of a type of paper that is not supported for duplex printing, print the
front side and then reload the paper manually and print the reverse side (this is only possible if the front
side was printed with this machine). In this case, set the paper type in the print driver to [xxx S2] (xxx:
paper type). Note that you cannot print on the reverse side when using Lightweight, Labels, or
Transparency paper.
• Depending on paper quality, paper fiber orientation, and other factors, proper printing may not be
possible with some types of paper. The use of standard paper is recommended.
Supported Paper Specifications
If using general paper (commercially available paper), make sure that it meets the following
specifications. To achieve the best print quality, however, we recommend you to use
standard paper instead.
Bypass tray
Tray 1 (Standard)
Tray 2 (1 Tray module)
(Optional)
Tray 2 - 4 (3 Tray module)
(Optional)
Tray 3, 4 (Tandem tray
module) (Optional)
Tray 6 (HCF B1) (Optional)
112
4 Paper
Paper Size
B4 , A4 , A4 , B5
, B6 , 8.5 x 11" , 8.5 x 11"
, 11 x 15" , 11 x 17"
, 12 x 18" , SRA3
Paper Tray
, B5 , A5 ,
, 8.5 x 13" ,
, A4-Cover ,
,
Specifications (G.S.M.)
55 - 280 gsm
60 - 256 gsm
60 - 256 gsm
60 - 256 gsm
60 - 256 gsm
55 - 216 gsm
Paper Type
Plain (60 - 105 gsm),
Recycled (60 - 105 gsm),
Bond (60 - 105 gsm),
Heavyweight (106 - 169 gsm),
Extra Heavyweight (170 - 256 gsm)*
Gloss (106 - 169 gsm),
HeavyweightGloss (170 - 256 gsm)*
1
,
1