Fuji Xerox DocuPrint C5005 d User Manual page 150

Connect Time-Out
TBCP Filter
Port Number
Maximum Sessions
Print Queue
[NetWare]
Port Status
150
5 Control Panel Settings
Setting
Sets the time after which data reception is canceled if data is not received.
Specify the value from 2 to 3600 seconds in 1-second increments. (See *2 on
P. 214.)
• [16 Seconds] (default)
Sets whether to enable or disable the TBCP filter during processing of
PostScript data.
• [Disabled] (default)
• [Enabled]
Sets the port number from 1 to 65535. (See *2 on P. 214.)
• [515] (default)
Note
• Set only unique port numbers.
Set the maximum number of clients that can connect to the printer
simultaneously by LPD. Specify the value from 1 to 10.
• [5] (default)
Sets the print data queue.
• [Data Process Order] (default)
The printer prints print data in the order that it is processed.
• [Job Submit Order]
The printer prints print data in the order that it is received.
Network/Port
NetWare
Setting
Sets whether to enable or disable the NetWare port at printer start-up.
• [Enabled]
• [Disabled] (default)
Important
• If the printer runs out of memory when the port is enabled, the port is
sometimes automatically disabled. If this happens, either disable unused
ports, or change the memory allocation under [Allocate Memory].
Description
NetWare
Port Status
NetWare
TransportProtocol
NetWare
Print Mode
NetWare
PJL
NetWare
No. of searches
NetWare
TBCP Filter
Description