Fuji Xerox DocuPrint C5005 d User Manual page 18

Never touch the exposed connectors
around this label. It may cause damage to
the parts due to static discharge.
Consumable
Store all consumables in accordance with
the instructions given on its package or
container.
Use a broom or a wet cloth to wipe off
spilled toner. Never use a vacuum cleaner
for the spills. It may catch fire by electric
sparks inside the vacuum cleaner and
cause explosion. If you spill a large volume
of toner, contact your local Fuji Xerox
representative.
Never throw a toner cartridge into an open
flame. Remaining toner in the cartridge may
catch fire and cause burn injuries or
explosion.
If you have a used toner cartridge no longer
needed, contact your local Fuji Xerox
representative for its disposal.
Never throw a waste toner bottle into an
open flame. Toner may catch fire and
cause burn injuries or explosion.
If you have a used waste toner bottle no
longer needed, contact your local Fuji
Xerox representative for its disposal.
Fusing Unit Safety
Do not remove the Fusing Unit. When
removing paper jam from the Fusing Unit,
contact your local Fuji Xerox
representative. Otherwise, it may cause
injuries.
Keep the drum cartridges and toner
cartridges out of the reach of children. If a
child accidentally swallows toner, spit it out,
rinse mouth with water, drink water and
consult a physician immediately.
When replacing the drum cartridges and
toner cartridges, be careful not to spill the
toner. In case of any toner spills, avoid
contact with clothes, skin, eyes, and mouth,
also avoid inhaling it.
18
Safety Notes
If toner spills onto your skin or clothing,
wash it off with soap and water.
If you get toner particles in your eyes, wash
it out with plenty of water for at least 15
minutes until irritation is gone. Consult a
physician if necessary.
If you inhale toner particles, move to a fresh
air location and rinse your mouth with
water.
If you swallow toner, spit it out, rinse your
mouth with water, drink plenty of water and
consult a physician immediately.
Fusing Unit Safety
When removing the Fusing Unit, always
switch off first and wait for 40 minutes until
it cools off.