Fuji Xerox DocuPrint C5005 d User Manual page 49

Right side and rear views of the printer
No. Name
1 Top left cover D
2 Upper left cover A
3 Duplex module cover B
4 Bottom left cover C
5 Adjusting foot
6 RESET button
7 Gigabit Ethernet interface
connector (optional)
8 Parallel interface connector
(optional)
9 10BASE-T/100BASE-TX
connector
10 USB 2.0 connector
7
8
9
10
6
5
Open this cover to remove jammed papers.
Open this cover to remove jammed papers.
Note
• Before you open this cover, exit the Sleep Mode and then switch off the
printer.
Open this cover to remove jammed papers.
Open this cover to remove jammed papers. When Tray 6 is installed, open this
cover after moving Tray 6 to the left.
Prevents the printer from toppling over. Move the printer to its installation site
and then rotate this adjuster in clockwise direction until it touches a floor.
Automatically switches the printer off when a current leakage is detected.
Installing a Gigabit Ethernet Board Kit (optional) allows the connection of a
1000BASE-T Ethernet interface cable.
Inserting Parallel Port Kit (optional) allows the connection of a Centronics
interface cable.
Connects to a 10BASE-T/100BASE-TX Ethernet interface cable.
Note
• Installing a Gigabit Ethernet Board Kit (optional) does not allow the use of
Ethernet connector in the standard configuration.
Connects to a USB 2.0 cable.
Description
2.1 Main Components and Functions
1
2
3
4
49