Fuji Xerox DocuPrint C5005 d User Manual page 416

17. Press the < > or <OK> button to select.
The [FeatureEnhance kit] is displayed.
Note
• If the message [Install options unavailable] appears, it
means that the Feature Enhance Kit ROM is not
installed correctly. Re-install the ROM.
18. Press the < > or <OK> button to select.
[Enable kit] is displayed.
19. Press the < > or <OK> button to select.
[Press OK to enable] is displayed.
20. Press the <OK> button to apply the setting.
The setup process starts.
21. When the [Enabled] message appears,
press the <Settings> button to return to the
print screen.
Important
• If the Feature Enhance Kit installed was previously used on another printer, the message [Serial Number
Error] appears, followed by the serial number of the other printer. Once you install the Feature Enhance
Kit and enable it with the control panel, that Feature Enhance Kit is not usable on any other printer. Also,
the message [Failed to enable] will appear if the Feature Enhance Kit is not installed correctly on the
printer.
416
A Appendix
Software Options
FeatureEnhance kit
FeatureEnhance kit
Enable kit
FeatureEnhance kit
Press OK to enable
FeatureEnhance kit
Enabling...
FeatureEnhance kit
Enabled