Table of Contents
Advertisement
Finisher-C1 with Booklet Maker (optional)
10
9
8
.
No.
Name
1
Front door
2
Right top tray
3
Exit cover H
4
Right middle tray
5
Staple cartridge [R1]
6
Right bottom tray
7
Booklet drawer [4]
8
Booklet staple cartridge [R2/R3]
9
Hole punch waste container
[R4]
10
Center tray (Finisher transport
cover F)
Note
• The HDD Extension Kit (optional) is required when installing the finisher.
Open this cover when removing jammed papers or staples, replacing or
adding staples, or discarding punch scraps.
Outputs are delivered here.
Open this cover when removing jammed papers.
Stapled or creased outputs are delivered here.
Contains staples.
Documents are delivered here when folding is selected for the Booklet
Creation feature.
Folds and staples outputs.
Contains staples. Remove this cartridge when replacing or adding staples,
or removing jammed staples.
Keeps the hole punch waste.
Prints are delivered here when they are unable to be delivered to the Right
top tray or Right middle tray. Pull the cover upward when removing
jammed papers.
Note
• Remove outputs delivered to the center tray frequently.
1
2
3
4
5
6
7
Description
2.1 Main Components and Functions
53
Advertisement
Chapters
Table of Contents
