Printable Area; Built-In Fonts - Fuji Xerox DocuPrint C5005 d User Manual

Printable Area

Note
• The actual printable area may vary depending on the printer control language.
Left 4.1 mm

Built-in Fonts

The fonts described below come built-in as standard. Note that the standard outline fonts
cannot be used with PostScript.
Note
• For information about fonts that are available with the PostScript, refer to the manual on the CD-ROM
included with the PostScript Driver Library.
Stroke fonts (for PCL5 and HP-GL/2) • European Stroke fonts
European
Top 4.1 mm
Unprintable Area
Printable Area
Right 4.1 mm
Bottom 4.1 mm
ESC/P • Roman
• Sans Serif
PDF • Arial
• Arial Italic
• Arial Bold
• Arial Bold Italic
• Courier
• Courier Italic
• Courier Bold
• Courier Bold Italic
* If the actual print start position is less than
4.1 mm from the top edge, a paper jam may
occur depending on the type of image
printed, the type of the output paper, and the
operating environment of the printer.
* When you select the Long-size paper A (900
x 297mm), the length of the print assured
area is calculated by subtracting 12.3mm
from the length of paper.
* When you select the Long-size paper B
(1200 x 297mm), the length of the print
assured area is calculated by subtracting
16.4mm from the length of paper.
• Symbol
• Times New Roman
• Times New Roman Bold
• Times New Roman Italic
• Times New Roman Bold Italic
• ITC Zepf Dingbats
• Gold SEMM
• Gold SAMM
A.1 Main Specifications
399