• mm / inch
Purpose:
To specify the measurement unit after the numeric value displayed on the operator panel.
Values:
Millimeters (mm)*
Inches (")
*
Factory default menu setting
• 2-Sided Report
Purpose:
To specify whether to print a report on either side of paper.
Values:
2-Sided*
1-Sided
*
Factory default menu setting
• Low Toner Alert Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Values:
Off
On*
*
Factory default menu setting
• Power On Wizard
Purpose:
To perform initial settings for the printer.
See also:
• "Setting Initial Settings on the Operator Panel" on page 45
Values:
Yes
No*
*
Factory default menu setting
Prints a report on either side of paper.
Prints a report on the single side of paper.
Does not show the alert message when the toner is low.
Shows the alert message when the toner is low.
Performs the initial settings for the printer.
Does not perform the initial settings for the printer.
Using the Operator Panel Menus and Keypad
309