Heart Rate Zone Alarm On/Off - Polar Electro S625X User Manual

If there is no or irregular running speed readings on the display,
check the following:
• Keep distance to other runners with foot pods.
• If you keep the wrist unit in front of you for longer than 15 seconds the
speed and distance measurements stop. You need to reactivate the
measurements by moving your hand.
Turning the zone alarm on/off
Note that you can not use the alarm when Bicycle functions
Note that trip distance is reset by pressing and holding signal/light
button. Therefore Trip should not be displayed in the upper row when
turning zone alarm on/off.
Press and hold the signal/light button.
When appears on the display the zone alarm is on. You will hear a beeping
sound if you are outside the limit.
If you do not want to use the zone alarm the flashing heart rate/pace
reading indicates if you are outside the limit. This function can be used if
you have set limits on for Interval Training Set or BasicSet.
In addition to the alarm you can see:
if you are exercising above heart rate/pace zone.
if you are exercising below heart rate/pace zone.
C 53
are on.