Table of Contents
Advertisement
Tests on/off
If you start from the Time of day display, repeat steps 1-4.
5. Scroll up or down until Tests is displayed.
6. Press OK to start setting the tests. On/OFF starts to flash.
7. Scroll up or down to set the tests on or off. Press OK.
Predicted maximum heart rate on/off (HR
If you start from the Time of day display, repeat steps 1-4.
5. Scroll up or down until HRmax-p is displayed.
6. Press OK to start setting the HR
7. Scroll up or down to set the HR
HR
-p can be turned on only if Polar Fitness Test is on.
max
Altitude and thermometer on/off
If you start from the Time of day display, repeat steps 1-4
5. Scroll up or down until Altitude is displayed.
6. Press OK to start setting the altitude measurement and thermometer.
On/OFF starts to flash.
7. Scroll up or down to set the altitude on or off. Press OK.
If you turned Altitude off, skip the rest of the altitude settings.
8. If you turned Altitude on, "Wait..." appears for a few seconds.
9. Altitude and a flashing number appear. Start adjusting the starting
point altitude. Adjustable units of 1/ 2 can be changed by pressing and
holding the signal/light button.
Scroll up or down until the desired altitude is displayed. Press OK.
It is recommended that you reset the altitude whenever a reliable
reference is available.
-p)
max
-p. On/OFF starts to flash.
max
-p on or off. Press OK.
max
B 34
Hide quick links:
Advertisement
Table of Contents
