Attaching The S1 Foot Pod On Your Shoe - Polar Electro S625X User Manual

1
2a
2c
3
4

Attaching the S1 foot pod on your shoe

1.
2a./b./c. Loosen your shoelaces and place
3.
2b
4.
5.
Detach the holder from the foot
pod by unfastening the flap and
lifting the foot pod from the rear.
the holder under the laces,
above the tongue of the shoe.
Tighten the laces.
Attach the foot pod to the
holder by fitting the front part
(closer to the red button) of the
foot pod to the holder and
pressing from the rear. Fasten
the flap. Make sure that the
foot pod does not move and
that it is aligned with your foot.
Turn the foot pod on by pressing
and holding the red button. A
green light will start to flash.
Turn the foot pod on after
your heart rate is displayed
on the wrist unit.
After exercising, turn the foot
pod off by pressing and holding
the red button. The green light
fades.
When the green light on the foot
pod turns red, you need to replace
the battery before your next run.
A 10