Wearing A Heart Rate Sensor; Pairing A Heart Rate Sensor - Polar Electro Loop 2 User Manual

We recommend using Polar H7 Bluetooth Smart® heart rate sensor. We cannot guarantee full compatibility
with other manufacturer's heart rate sensors.

Wearing a Heart Rate Sensor

1. Moisten the electrode area
of the strap.
2. Tie the strap around your
chest, just below the chest
muscles, and attach the
hook to the other end of the
strap. Adjust the strap
length to fit tightly but com-
fortably.
3. Attach the connector to the
strap.
4. Check that the moist elec-
trode area is firmly against
your skin and that the Polar
logo of the connector is in a
central and upright position.
Detach the connector from the strap, and rinse the strap under running water after every training session.
Sweat and moisture may keep the heart rate sensor activated, so also remember to wipe it dry. For more
detailed caring instructions see

Pairing a Heart Rate Sensor

Before you start training with the heart rate sensor, it has to be paired with your Polar Loop 2.
1. Wear your compatible heart rate sensor. Make sure the electrode areas of the strap are moistened. If
necessary, see further instructions from the heart rate sensor's user guide.
2. Bring Polar Loop 2 right next to the sensor.
3. Tap the Polar Loop 2 touch button and wait until the LED display turns off. Then wait a couple of
seconds until PAIRED
Taking care of your Polar Loop
scrolls on the display.
2.
24