Calibration Manually; Bicycle Settings - Polar Electro S625X User Manual

You get the best calibration result if you wear the same shoes that you
normally use and you run on the same type of surface.
You can cancel the calibration by pressing the stop button on the wrist unit.
If you ran less than the preset distance, CALIBRATION FAILED is displayed.

Calibration manually

The calibration factor is calculated as a ratio of the actual distance to the
uncalibrated distance. For example if you ran 400 meters and the wrist unit
shows a distance of 390 meters, the calibration factor should be adjusted to
400/390 = 1026.
If you start from the Time of Day display, repeat steps 1-5.
6. CALIBRATE? SPEED is displayed. Press OK.
7. Scroll up or down until Calibration Manual is displayed.
8. Press OK to start adjusting the calibration factor.
9. SET FACTOR is displayed. Scroll up or down to adjust the factor. Press OK.

Bicycle settings

You can set two bike preferences for the wrist unit. Make the settings
ready for both bikes; when you start exercising, just select bike 1 or 2. As
you take the bike settings 1 or 2 in use speed and distance measuring
functions are always on. Select the bike features off when exercising
without a bicycle. Wheel size settings are a prerequisite for cycling
information.
B 38