Setting Timers; Setting Limits; Setting Pace Limit - Polar Electro S625X User Manual

Setting timers

If you start from the Time of day display, repeat steps 1-5.
6. Scroll up or down until desired timer is displayed. Press OK to start
setting the timer.
7. Scroll up or down to turn the timer on or off. Press OK.
Timer OFF: skip steps 8-9.
8. Scroll up or down to adjust minutes. Press OK.
9. Scroll up or down to adjust seconds. Press OK.
Setting heart rate limits
If you start from the Time of day display, repeat steps 1-5.
6. Scroll up or down until desired limits are displayed.
7. Press OK to start setting the limits.
8. Only when setting limits 1, scroll up or down to choose HR or % of HR
based limits. Press OK to select.
9. Lim High appears. Scroll up or down to adjust your upper limit. Press OK.
10. Lim Low appears. Scroll up or down to adjust your lower limit. Press OK.
Only one limit type (HR, % of HR
exercise set. The limit type selected in limits 1 determines the limit type
in all limits in an exercise set.

Setting pace limit

Pace is the speed at which you run. It is measured in minutes per kilometer
or mile. Pace limits can only be used when running.
If you start from the Time of day display, repeat steps 1-5.
6. Scroll up or down until desired limits are displayed.
7. Press OK to start setting the limits.
8. Only when setting limits 1, scroll up or down to choose PACE based limits.
Press OK to select.
or Pace) can be selected in an
max
B 24
max