Turning Functions On/Off; Owncal Calorie Counter On/Off - Polar Electro S625X User Manual

Turning functions on/off

Options
Function Set
OwnCal Tests
On/OFF On/OFF
1. In the Time of day display scroll up or down until OPTIONS
is displayed.
2. Press OK to enter the Options mode. EXERCISE SET is
displayed.
3. Scroll up or down until FUNCTION SET is displayed.
4. Press OK to start the function settings. OwnCal is displayed.
To set the following functions on you have to set your user information.
If kg/lbs are displayed as you start setting the function on, the wrist unit
points out that you have not set your all user information.

OwnCal calorie counter on/off

If you start from the Time of day display, repeat steps 1-4.
5. Press OK to start setting the OwnCal function. On/OFF starts to flash.
6. Scroll up or down to set the OwnCal on or off. Press OK.
For getting the most accurate OwnCal results, update the VO
and the HR setting with clinically measured values (if available). If you do
max
not know your clinically measured values perform Polar Fitness Test and
update the OwnIndex and HR
HR -p Altitude
max
On/OFF On/OFF
-p settings in Fitness Test mode.
max
B 33
AutoLap
On/OFF
setting
2max