Polar Electro S625X User Manual page 111

discharged battery is the battery symbol on the display. Also the digits fade
when the backlight is used. Have the batteries checked.
...there are no reactions to any buttons?
Reset the Polar Running Computer. Resetting clears watch settings which
will return to the default settings. User information and measuring units
settings will be saved.
1. Press the RESET button with a pen tip. Display becomes full of digits.
If you don't press any button after reset within one minute the wrist
unit returns to the Time of day display.
2. Press any of the buttons once. Time of day is displayed.
...the battery of the wrist unit must be replaced?
We recommend having all service done by an authorized Polar Service
Center. The guarentee does not cover damage or consequential damage
caused by service not authorized by Polar Electro. Polar Service will test
your wrist unit for water resistance after battery replacement and make a
full periodic check of the complete Polar Running Computer.
...there are irregular speed or distance readings?
1. Check that the user settings of the wrist unit are set correctly.
2. You may have come within range of strong electromagnetic-signals,
which cause erratic readings.
3. Keep distance to other runners with foot pods.
...Check Sensor message appears on the display?
1. Check that you have the right speed settings turned on from the wrist unit.
2. Make sure that the foot pod is turned on.
3. If there is no light on the foot pod you may have exceeded 40 running
hours and the battery of the foot pod needs to be replaced. Check the
Easy start section of this manual for detailed instructions on changing
the battery.
H 107