Table of Contents
Advertisement
To use the thermometer the altitude must be turned on. For most
accurate altitude readings, calibrate the altimeter every time before an
exercise.
To continue setting your settings, press the stop button or to return to the
Time of day display, press and hold the stop button.
AutoLap on/off
When you use the AutoLap function, the running computer automatically
records lap times continuously after each time you have run or cycled the
preset distance. For example if you set the AutoLap distance at 400 meters,
the first lap will be recorded at 400 meters, the second lap at 800 meters
and so on.
If you start from the time of the day display, repeat steps 1-4.
5. Scroll up or down until AUTOLAP is displayed.
6. Press OK to start setting the AutoLap. On/Off starts to flash.
7. Scroll up or down to set the AutoLap on or off. Press OK.
OFF: skip the rest of AutoLap settings.
8. Set A. Lap Distance is displayed. Scroll up or down to set the AutoLap
distance. Press OK to select the lap distance.
AutoLap can be turned on only if the speed function is activated in
speed settings.
B 35
Hide quick links:
Advertisement
Table of Contents
