Table of Contents
Advertisement
3. Start from the Time of day display by pressing the OK to start measuring
your heart rate. A heart symbol will start flashing and your heart rate in
beats per minute will appear in max. 15 seconds. The wrist unit returns
automatically to the Time of day display within 5 minutes if there is no
heart rate reception.
The following displays start to alternate, if you have no speed or altitude
settings in use, as you enter the Measuring mode:
Exercise name Memory left Speed OFF Altitude OFF
Time of day
Current
heart rate
BasicUse (E0)/
Exercise set in use
(E1-E5)
If you are running or cycling, turn the speed settings on by pressing and
holding the down button. Repeat until the right speed setting is displayed
in the right-hand corner of the display.
-- = speed settings off
ru = running speed
b1 = bike 1
b2 = bike 2
Make sure that you have the right speed settings turned on before
starting the recording.
Recording rate
No speed settings in use
C 50
Hide quick links:
Advertisement
Table of Contents
