Installing Scsi Controller Driver (N8103-75; Installing Scsi Controller Driver (N8103-56/-95/N8190-126 - NEC Express5800/120Rh-2 N8100-1061F User Manual

Installing SCSI Controller Driver (N8103-75)

If you utilize SCSI controller driver (N8103-75), install it according to the following procedure:
<In the case of use of Windows Server 2003 SevicePack1 or Windows Server 2003
R2>
If you utilize SCSI controller driver (N8103-75), update your system with NEC
EXPRESSBUILDER CD-ROM attached to your system.
The SCSI controller driver will be installed automatically.
<In the case of Windows Server 2003 which has not installed SevicePack1>
1.
Start [Device Manager] from [Start] menu → [Control Panel] → [Administrative Tools]→
[Computer Management].
2.
Double-click the SCSI Controller driver which Device Manager lists as Other device.
3.
Click [Update Driver].
4.
When the "Update Device Driver Wizard" appears, select "Install from a list or specific
location [Advanced]" and click [Next].
5.
Select "Don't search. I will choose the driver to install" and click [Next].
6.
Click [Have Disk..].
7.
Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppy
disk drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].
8.
Specify the following driver and click [Next].
[Adaptec SCSI Card 29320ALP -Ultra320 SCSI] (When N8103-75 board is installed.)
The installation of the driver is completed.
Restart the system according to the message appeared on the screen.

Installing SCSI Controller Driver (N8103-56/-95/N8190-126)

If you utilize SCSI controller driver (N8103-56/-95/N8190-126), update your system with NEC
EXPRESSBUILDER CD-ROM attached to your system.
The SCSI controller driver will be installed automatically.
Installing Windows Server 2003 E-19