Advanced Configuration - NEC Express5800/120Rh-2 N8100-1061F User Manual

Advanced Configuration

Move the cursor onto "Advanced Configuration" and press Enter to display the submenu.
The following table lists submenu items, available parameter, and descriptions.
Submenu item
Reset SCSI Bus at
IC Initialization
Display <Ctrl><A>
Message During
BIOS Initialization
Extended Int 13
Translation for DOS
Drives > 1 GByte
POST Display Mode
SCSI Controller Int
13 Support
Domain Validation
Support Removable
Disks Under Int 13
as Fixed Disks
BIOS Support for
Bootable CD-ROM
HostRAID
Move the cursor onto "HostRAID" and press Enter to choose the HostRAID option.
Submenu item
HostRAID
NOTE:
For detail explanation on the HostRAID feature, see
SCSISelect Utility User's Manual and Adaptec Storage Manager -
Browser Edition User's Guide or Adaptec Storage Manager User's
Guide. You may view or print these documents from the NEC
EXPRESSBUILDER CD-ROM.
Parameter Description
[Enabled] Select "Enabled".
Disabled
[Enabled] Select "Enabled".
Disabled
[Enabled] Select "Enabled".
Disabled
[Verbose] Select "Verbose".
Silent
Diagnostic
[Enabled] Enable or disable SCSI BIOS.
Disabled: Select "Enabled" for most cases other than the
NOT Scan following:
Disabled: To boot the OS from a hard disk drive
•
scan bus connected to any other controller than SCSI
controller. (If the controller has no hard disk
drives connected, there is no problem.)
BIOS of the SCSI controller may be disabled to
•
reserve an area in the expansion ROM space
if the controller has no hard disk drives
connected.
[Enabled] Select "Enabled".
Disabled
Boot Only AIC-79xx BIOS automatically controls the
All Disks removable disks.
[Disabled]
[Enabled] Select "Enabled".
Disabled
Parameter Description
Enabled Select "Disabled" if the onboard HostRAID
[Disabled] controller is not used.
Configuring Your Server 4-23
[ ]: Factory-set
[ ]: Factory-set