When you select the array on Main Menu, the detailed information of the hard disk drives in array is
displayed.
Detailed indications
■
ID
-
Indicates SCSI ID of hard disk drive that configures the array
■
Type
-
Indicates RAID level for the array.
Striped (R0)
Mirrored (R1)
Stripe/Mirror (R10)
■
Vendor
-
Indicates the manufacturer of hard disk drive.
■
Product
-
Indicates the model name of hard disk drive.
■
Size
-
Indicates the capacity of hard disk drive.
■
Status
-
Indicates the status of hard disk drive.
Optimal
Degraded
Failed
Building
Verify
Replaced
Missing
Exiting the Utility
To exit the utility, press Esc until the following message prompts you to exit. Select [Yes] to exit
and press any key to restart the computer. The change you have made becomes valid after the
system restarts.
-
Array configured in RAID0
-
Array configured in RAID1
-
Array configured in RAID10 (spanning of RAID1)
-
Hard disk drive is normally operating.
-
Hard disk drive is being degraded.
-
Hard disk drive is being failed.
-
Hard disk drive is being built.
-
Hard disk drive is being verified.
-
Hard disk drive is being rebuilt.
-
Hard disk drive is being hidden from controller.
Configuring Your Server 4-31