Rear View - NEC Express5800/120Rh-2 N8100-1061F User Manual

2-6 General Description

Rear View

1
15
16 17-1 18 16 17-2
1 Low-profile PCI board extension slots
Mount PCI boards of the low-profile type into the slots. The slots are called 3C, 2C, and 1C
from top.
2 Captive thumbscrew
Secure the logic cover.
3 Full-height PCI board extension slots
Mount PCI boards of the full-height type in the slots. The slots are called 3B, 2B, and 1B
from top.
4 AC inlet
Connect the attached power cord to this socket.
5 AC POWER LED
This LED turns green and flashes when the server receives AC power from the power cord.
The LED turns green when the server power switch is turned on, and it turns amber when a
power failure occurs.
6 Power supply unit (power supply slot 1)
This unit supplies power to the server.
7 Power supply unit extension slot (power supply slot 2)
Mount an optional power supply unit in this slot. The slot is protected with the blank cover
in the standard status.
8 Mouse/keyboard connectors
Connect the mouse and keyboard to the connectors through the provided relay cables.
9 SCSI connector
Connect external SCSI device to this connector.
10 UID LED (blue)
This LED goes on when the UID switch is pressed. (The LED also goes on when software
issues a command.)
2 3
14-2 14-1 13 12 11 10
18
9 8 7
4
6 5