Standard Features - NEC Express5800/120Rh-2 N8100-1061F User Manual

2-16 General Description

STANDARD FEATURES

High performance
Intel Xeon
 
(3.20DGHz / 3.20GHz / 3.40GHz /
3.60GHz / 3.80GHz)
High-speed network interface
(1000Mbps/100Mbps/10Mbps supported)
High-speed disk access
(Ultra320 SCSI)
High-speed memory access (DDR2-400)
High-reliability
Memory monitoring feature (error
correction/error detection)
CPU/memory degradation feature (logical
isolation of a failed device)
Memory chipkill feature
Bus parity error detection
Temperature detection
Error notification
Internal fan monitoring feature
Internal voltage monitoring feature
Redundant power supply (hot-swap)
Onboard RAID 0/1
Auto-rebuild feature (hot-swappable)
BIOS password feature
Mechanical security lock
Remote Management Card
Redundant fans (option)
Management Utilities
NEC ESMPRO
NEC DianaScope
Maintenance Features
Off-line Maintenance Utility
Memory dump feature using the DUMP
switch
Processor
Expandability
Three full-length, full-height 64-bit/100
MHz PCI-X riser slots and three low
profile 64-bit/66 MHz riser slots
Large memory of up to 16 GB
Six hot-swap SCSI hard disk drive bays
Up to two multi-processors are available
for upgrade.
One backup file bay
USB2.0 interface (A USB-support driver
is required.)
Two network ports
Many Available Features
Graphic accelerator "ATI RADEON 7000"
support
El Torito Bootable CD-ROM (no
emulation mode) format support
POWER switch mask
Software power-off
Remote power-on feature
AC-Link feature
Consoleless feature
Self-diagnosis
Power On Self-Test (POST)
Test and Diagnosis (T&D)
Easy and Fine Setup
NEC EXPRESSBUILDER (system setup
utility)
Configuration Parameter Diskette Creator
SETUP (BIOS setup utility)
SCSISelect (SCSI device utility)