CD-ROM Drive
The server is provided with the CD-ROM drive on its front to read data from a CD-ROM (read-only
compact disk). The CD-ROM provides larger and faster data read than the floppy disk.
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-3 to 1-8 for details.
Set a CD-ROM on the CD-ROM drive in the following procedure.
1.
Confirm that the power of the server is on (with the POWER LED being lit in green)
before setting the CD-ROM on the CD-ROM drive.
2.
Press the Eject button on the front of the CD-ROM drive.
The tray comes out a little.
3.
Hold the tray lightly and pull it out toward you until the tray stops.
4.
Put the CD-ROM on the tray carefully and securely with the character printed surface
facing upward.
Do not leave the tray ejected from the CD-ROM drive.
CAUTION
General Description 2-39