Use Of Internal Hard Disk Drives In A Disk Array Configuration; Standard Configuration - NEC Express5800/120Rh-2 N8100-1061F User Manual

Use of internal hard disk drives in a disk array configuration

To use the internal hard disk drives in a disk array configuration in the server containing a disk array
controller board, reconnect the SCSI cables and LED cables on the mother board.
The internal hard disk drive interface is connected to the SCSI connector on the mother board at
shipment.
IMPORTANT:
not need to connect an LED cable.

Standard configuration

Mother board
REAR
SCSI connector
When using N8103-91 disk array controller, you do
Upgrading Your Server 9-39
Internal backup
device
Hard disk
drive
SCSI ID3-5
Hard disk
drive
SCSI ID0-2
SCSI backplane
FRONT