NEC Express5800/120Rh-2 N8100-1061F User Manual page 102

4-6 Configuring Your Server
Primary IDE Master/Primary IDE Slave/Secondary IDE Master/Secondary IDE
Slave/Serial ATA Channel 0 Master/ Serial ATA Channel 1 Master
Correspondence between the menu items and devices:
Primary IDE Master:
Primary IDE Slave:
Secondary IDE Master:
Secondary IDE Slave:
Serial ATA Channel 0 Master:
Serial ATA Channel 1 Master:
Option
Type
The following options do not appear when None or Auto are selected for Type.
Multi-Sector
Transfers
LBA Mode Control
Transfer Mode
Ultra DMA
ATA hard disk drive 1 (option)
ATA hard disk drive 2 (option)
CD-ROM drive (standard)
None
Serial ATA hard disk drive 1 (option)
Serial ATA hard disk drive 2 (option)
Parameter
None
User
[Auto]
CD-ROM
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
Enabled
Disabled
Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
FPIO 3/DMA1
FPIO 4/DMA2
Disabled
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Description
Selects the type of device attached to
the IDE or serial ATA channel. It is
strongly recommended to keep the
factory setting [Auto].
Specifies the number of sectors that
are transferred per block during
multiple sector transfers.
Enable/disable LBA instead of
cylinder, head, sector, addressing.
Select the method for moving data
to/from the drive.
Select the Ultra DMA mode used for
moving data to/from the drive.
Your Setting
[ ]: Factory-set