NEC Express5800/120Rh-2 N8100-1061F User Manual page 161

Installing SCSI Controller Driver (N8103-65F)
If you utilize SCSI controller driver (N8103-65F), install it according to the following procedure:
1.
Start [Device Manager] from [Start] menu → [Control Panel]→ [Administrative Tools] →
[Computer Management].
2.
Double-click the SCSI Controller driver which Device Manager lists as Other device.
3.
Click [Update Driver].
4.
When the "Update Device Driver Wizard" appears, select "Install from a list or specific
location [Advanced]" and click [Next].
5.
Select "Don't search. I will choose the driver to install" and click [Next].
6.
Click [Have Disk..].
7.
Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppy
disk drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].
8.
Specify the following driver and click [Next].
[INITIO INI-A10XU2W PCI SCSI Controller] (When N8103-65F board is installed.)
The installation of the driver is completed.
Restart the system according to the message appeared on the screen.
Installing the Operating System with Express Setup 5-19