NEC Express5800/120Rh-2 N8100-1061F User Manual page 368

E-6 Installing Windows Server 2003
6.
Select [Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER] from [Create
Support Disk] menu.
7.
Insert a floppy disk into the floppy disk drive according to the instruction on the screen.
Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER will be created.
Write-protect and attach a label, then keep it safely.
Create from [Master Control Menu]
[Master Control Menu] runs on the following operating systems.
– Windows Server 2003 x64 Editions
– Windows Server 2003
– Windows XP x64 Edition
– Windows XP
– Windows 2000
– Windows Me/98/95
– Windows NT 4.0
You can create Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER from
[Master Control Menu], if you have the computer on which the above operating systems
operate.
Follow the steps below.
1.
Prepare one 3.5-inch floppy disk.
2.
Run the operating system.
3.
Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive of the server.
[Master Control Menu] will appear.
4.
Click on [Setup] with left mouse button and click [Make OEM-DISK] and then [for
Windows Server 2003].
NOTE:
Right-click.
5.
Insert the floppy disk into the floppy disk drive according to the message.
Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER will be created.
Write-protect and attach a label, then keep it safely.
You can do the same operation with the menu appeared by the