Drive Cover - NEC Express5800/120Rh-2 N8100-1061F User Manual

Drive Cover

Open the drive cover when installing/removing a fan assembly, processor, and backup file device or
reconnecting an internal cable.
Removal
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Pull out the server from the rack.
3.
Slide the drive cover toward the rear of the server while pressing the lock button on the
cover.
4.
Lift off the drive cover from the server.
Installation
When installing the drive cover, confirm that the tab of the cover is securely inserted into the slot in
the server frame.
Slide the drive cover toward the rear of the server. The drive cover is locked when a distinct "click"
is heard. At this time, check the release button for normal state.
Upgrading Your Server 9-17