Collecting Event Log - NEC Express5800/120Rh-2 N8100-1061F User Manual

COLLECTING EVENT LOG

This section describes on how to collect the log of various events that occurred on the server.
IMPORTANT:
the procedure below after restarting the system.
NOTE: The different revision processor may be mixed in additional
CPU kit. When Windows 2000 is used, following message may be
appeared in the System Log of the Event Viewer after extension the
different revision of two or more CPUs in the NEC Express server. If
this message is logged, it is no problem for operation.
1.
Click [Management Tool] → [Event Viewer] from the Control Panel.
2.
Select the type of the log to collect.
On [Application Log], the events related to the running application is archived. On
[Security Log], the events related to the security is archived. On [System Log], the
events occurred at the item which configures Windows 2000 system is archived.
3.
Click [Save as...] in the [Run] menu.
4.
Input the file name of archived log in the [File Name] box.
5.
Select the type of the log file you want to save in the [File Type] list box and click [OK].
For more information, refer to Windows 2000 Online Help.
If STOP error, system error, or stall occurred, follow
Troubleshooting 8-27