Dimm - NEC Express5800/120Rh-2 N8100-1061F User Manual

DIMM

Install the additional DIMM (Dual Inline Memory Module) to the DIMM socket on the mother
board in the server. The mother board is provided with eight DIMM board slots.
NOTE: Up to 16GB of memory (2GB DIMM x 8) can be installed.
(The factory-installed DIMMs need to be replaced in this case.) Two
DIMMs of 512MB are factory-installed in DIMM slots #7 and #8.
IMPORTANT:
The DIMM is extremely sensitive to static electricity. Make sure to
touch the metal frame of the server to discharge static electricity
from your body before handling the DIMM. Do not touch the
DIMM terminals or on-board parts by a bare hand or place the
DIMM directly on the desk. For static notes, see the section "Anti-
static Measures" described earlier.
Make sure to use the DIMM authorized by NEC. Installing a third-
party DIMM may cause a failure of the DIMM as well as the server.
Repair of the server due to failures or damage resulted from
installing such a board will be charged.
Upgrading Your Server 9-19