NEC Express5800/120Rh-2 N8100-1061F User Manual page 89

5.
Hold the handle and pull out the server from the rack slowly and carefully.
The server clicks to be latched.
6.
Pull out the server from the rack with the right and left release lever pressed to release the
latch.
IMPORTANT:
Pull out the server slowly holding the bottom of the server by at
least two persons.
Do not apply any load on the server pulled out from the rack.
Doing so may cause personal injury if the server drops.
To remove some mechanical parts of the rack, see the installation procedure.
Captive thumb screws
Handles
Setting Up Your Server 3-15
Release lever