Post Error Messages; Power Off - NEC Express5800/120Rh-2 N8100-1061F User Manual

POST Error Messages

When POST detects an error, it displays an error message on the display unit screen. See Chapter
8 for POST error codes.
IMPORTANT:
consulting with your service representative. Alarm messages are
useful information for maintenance.

Power Off

Follow the procedure below to power off the server. If the power cord of the server is connected to
a UPS, refer to the manual that comes with the UPS or the manual for the application that controls
the UPS.
IMPORTANT:
the server.
1.
Shut down the OS.
2.
Press the POWER switch on the front of the server.
The POWER LED goes off.
3.
Power off peripheral devices.
Take a note on the messages displayed before
Always allow POST to complete before turning off
General Description 2-35