Optional Network Board Driver - NEC Express5800/120Rh-2 N8100-1061F User Manual

Optional Network Board Driver

If you want to utilize optional Network Board (N8104-86/88/111), install the driver stored in NEC
EXPRESSBUILDER CD-ROM.
In case of utilizing (N8104-86/88/111)
"CD-ROM Drive Letter:\WINNT\W2K3AMD\NS1\PRO100\WS03_32E"
In case of utilizing (N8104-112/103/113/109/115)
"CD-ROM Drive Letter:\WINNT\W2K3AMD\NS1\PRO1000\WS03_32E"
If the procedure of installation is not clear, refer to the installation procedure described in the
section "Installation of the Optional Network Board Driver".
Installation of the Optional Network Board Driver
1.
Start Device Manager.
2.
Click [Network adapters] and double-click [(Network Adapter Name)].
[(Network Adapter Name) Properties] appears.
NOTE:
other names show the Optional Network Board.
3.
Click [Driver] tab and click [Update Driver...]. [Hardware Update Wizard] appears.
4.
Select the [Install from a list or specific location (Advanced)] radio button and click
[Next].
5.
Select the [Search for the best driver in these locations] radio button and check off the
[Search removable media (floppy, CD-ROM...)] check box.
6.
Check the [Include this location in the search] check box and when using [(N8104-
86/111)], specify [CD-ROM driveletter:\WINNT\W2K3AMD\NS1\PRO100\WS03_32E].
And when using [(N8104-112/103/113/109/115)],
specify [CD-ROM driveletter:\WINNT\W2K3AMD\NS1\PRO1000\WS03_32E].
Then click [Next].
7.
Click [Finish].
Installing Windows Server 2003 x64 Editions D-13
[(Intel(R) PRO/1000...)] is the name of On-Board adapter. All