Table of Contents
Advertisement
D-16 Installing Windows Server 2003 x64 Editions
Installing SCSI Controller Driver (N8103-56/95)
The SCSI controller driver will be installed automatically.
Installing SCSI Controller Driver (N8103-75)
If you utilize SCSI controller driver (N8103-75), update your system with NEC
EXPRESSBUILDER CD-ROM attached to your system.
The SCSI controller driver will be installed automatically.
Installing RAID Controller Driver (N8103-80F)
To additionally install the N8103-80F in a system containing Windows Server 2003, connect the
controller and take the following steps to install the driver:
1.
When the [Found New Hardware Wizard] dialog box appears, click [Next].
2.
When the [Install Hardware Device Drivers] dialog box appears, select [Search for a
suitable driver for my device (Recommended)], and click [Next].
3.
When the [Locate Driver Files] dialog box appears, select [Floppy disk drives], insert
"Windows Server 2003 x64 Edition for NEC EXPRESSBUILDER" into the floppy disk
drive, and click [Next].
4.
When the [Driver Files Search Results] dialog box appears, click [Next].
5.
Copying of the driver is completed, and the [Completion of the new hardware detection
wizard] dialog box below appears. Click [Complete].
The installation of the driver is completed.
Restart the system according to the message appeared on the screen.
SETTING FOR COLLECTING MEMORY DUMP
(DEBUG INFORMATION)
Set for collecting memory dump using the procedure described in Chapter 5.
Advertisement
Table of Contents
Troubleshooting
